Terms and abbreviations
DescriptionTerm
Assistant control panelACS-AP-…
Optional USB to RJ45 cableBCBL-01
The capacitors connected to the DC linkCapacitor bank
The part in which the control program runs.Control unit
DC circuit between rectifier and inverterDC link
Energy storage which stabilizes the intermediate circuit DC voltageDC link capacitors
Frequency converter for controlling AC motorsDrive
Embedded fieldbusEFB
Electromagnetic compatibilityEMC
Physical size of the drive or power moduleFrame, frame size
Insulated gate bipolar transistorIGBT
DC circuit between rectifier and inverterIntermediate circuit
Converts direct current and voltage to alternating current and
voltage.
Inverter
A pre-defined set of default values of parameters in a drive control
program.
Macro
In the drive control program, user-adjustable operation instruction
to the drive, or signal measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed
as an object. For example, variable, constant, or signal.
Parameter
Programmable logic controllerPLC
Converts alternating current and voltage to direct current and voltageRectifier
Radio-frequency interferenceRFI
Safety integrity level (1…3) (IEC 61508, IEC 62061, IEC 61800-5-2)SIL
Safe torque off (IEC/EN 61800-5-2)STO
Related manuals
You can find manuals on the Internet. See below for the relevant code/link. For
more documentation, go to www.abb.com/drives/documents.
ACS180 manuals link list
Introduction to the manual 23
To Next Page
Loading...
