ABB ACS180-04S-03A7-1 - Drive Installation Procedures

Installing the drive
￭
To install the drive with screws
1. Make marks onto the surface for the mounting holes. See the diagram below
and Dimensions and weights (page 121).
2. Drill the holes for the mounting screws.
R0
R1
M2
M2
M1
M1
R2-R4
M2
M1
Mounting screwsM2M1Frame size
Metricinmminmm
M46.461642.3660R0
M47.091802.3660R1
M47.5190.54.17106R2
M57.521915.83148R3
M57.521919.21234R4
3. Put the drive onto the mounting holes.
4. Tighten the mounting screws.
40 Mechanical installation
4