ABB ACS580MV - Page 115

Option 115
3. Marshalling PLC parameter setting
The following parameters are necessary.
Marshalling PLC
parameter
Setting Description
Par.1 Control
source
IOs control
(example)
Select Marshalling PLC control source.
Par.2 Number of
motors
2 (example) Define number of motors.
Par.3 MB
feedback signal
TWO
(example)
Define how many feedback signals MB has.
Par.4 MSS
feedback signal
TWO
(example)
Define how many feedback signals MSS has.
Par.5 MB
command signal
Pulse
(example)
Define control signals type of MB.
Par.6 MSS
command signal
Pulse
(example)
Define control signals type of MSS.
Par.7 MB pulse
time
3s
(example)
Define pulse time of MB control signal.
Par.8 MSS pulse
time
3s
(example)
Define pulse time of MSS control signal
Par.9 MB close
time limit
3s
(example)
Define maximum operating time for closing MB