ABB ACS880-04 - Declarations of conformity; Related documents

Declarations of conformity
ABB
Declaration of Conformity
Supply of Machinery (Safety) Regulations 2008
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx
We
Manufacturer:
Address:
Phone:
Frequency converters
with regard to the safety functions
The following designated standards have been applied:
EN 61800-5-2:2007
EN IEC 62061:2021
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 60204-1:2018
The following other standards have been applied:
EN 61508:2010, parts 1-2
EN 61800-5-2:2017
Helsinki, August 31, 2022
Signed for and on behalf of:
Mika Vartiainen
Local Division
Manager
ABB Oy
Document number 3AXD10001329538
ABB Oy
Hiomotie 13, 00380 Helsinki, Finland.
+358 10 22 11
are in conformity with all the relevant safety component requirements of the Supply of Machinery (Safety) Regulations 2008, when the listed
safety functions are used for safety component functionality.
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
Safety of machinery – Functional safety of safety-related control systems
declare under our sole responsibility that the following products:
ACS880-01/-11/-31
ACS880-04/-04F/-M04/-14/-34
- Safe Torque Off
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Prevention of unexpected start-up
(with FSO-12 option module, +Q973, encoderless)
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Safe speed monitor, Safe direction,
Prevention of unexpected start-up (with FSO-21 and FSE-31 option modules, +Q972 and +L521, encoder supported)
- Safe motor temperature (with FPTC-01 thermistor protection module, +L536)
- Safe stop 1 (SS1-t, with FSPS-21 PROFIsafe module, +Q986)
Functional safety of electrical / electronic / programmable electronic safety-
related systems
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
Product Unit Manager
ABB Oy
Aaron D. Wade
The product(s) referred in this declaration of conformity fulfil(s) the relevant provisions of other UK statutory requirements, which are notified in
a single declaration of conformity 3AXD10001326405.
Authorized to compile the technical file: ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT.
Page 1 of 1
ABB
EU Declaration of Conformity
Machinery Directive 2006/42/EC
xxxxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxx xx
We
Manufacturer:
Address:
Phone:
Frequency converters
with regard to the safety functions
The following harmonized standards have been applied:
EN 61800-5-2:2007
EN IEC 62061:2021
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 60204-1:2018
The following other standards have been applied:
IEC 61508:2010, parts 1-2
IEC 61800-5-2:2016
Helsinki, August 31, 2022
Signed for and on behalf of:
Mika Vartiainen
Local Division
Manager
ABB Oy
Document number 3AXD10000099646
ABB Oy
Hiomotie 13, 00380 Helsinki, Finland.
+358 10 22 11
declare under our sole responsibility that the following products:
ACS880-01/-11/-31
ACS880-04/-04F/-M04/-14/-34
- Safe Torque Off
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Prevention of unexpected start-up
(with FSO-12 option module, +Q973, encoderless)
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Safe speed monitor, Safe direction,
Prevention of unexpected start-up (with FSO-21 and FSE-31 option modules, +Q972 and +L521, encoder supported)
- Safe motor temperature (with FPTC-01 thermistor protection module, +L536)
- Safe stop 1 (SS1-t, with FSPS-21 PROFIsafe module, +Q986)
are in conformity with all the relevant safety component requirements of EU Machinery Directive 2006/42/EC, when the listed safety functions are
used for safety component functionality.
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
Safety of machinery – Functional safety of safety-related control systems
Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
Aaron D. Wade
Product Unit Manager
ABB Oy
Functional safety of electrical / electronic / programmable electronic safety-
related systems
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
The product(s) referred in this Declaration of conformity fulfil(s) the relevant provisions of other European Union Directives which are notified in
Single EU Declaration of conformity 3AXD10000497831.
Authorized to compile the technical file: ABB Oy, Hiomotie 13, 00380 Helsinki, Finland.
Page 1 of 1
Related documents
CodeName
3AUA0000128301ACS880-04 drive modules (200 to 710 kW, 300 to 700 hp) hardware manual
3AXD50000009366ACS880-04 drive modules (200 to 710 kW, 300 to 700 hp) quick installation guide
3AUA0000085685ACS-AP-I, -S, -W and ACH-AP-H, -W assistant control panels user’s manual
3AUA0000085967ACS880 primary control program firmware manual
3AUA0000094606Drive Composer start-up and maintenance PC tool user's manual
3BFE64059629Converter module capacitor reforming instructions
You can find manuals on the Internet. See below for the relevant code/link. For more
documentation, go to www.abb.com/drives/documents.
ACS880 China RoHS II DoCEcodesign information (EU
2019/1781 and SI 2021 No. 745)
ACS880-04 manuals
268 Technical data and references
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH