Communication to SPRS 23
Drive composer loads the parameters and displays the following window.
You can also select the dedicated connections to the drive:
Connection Result
DDCS (ACS800
only)
Connects to the drive through DDCS (fiber optic)
communication.
USB/COM Connects to the drive through USB connection.
Use this option only when you want to connect to the drive
through serial connection, example, USB cable to ACS-AP-
x panel.
Ethernet Connects to the drive through Ethernet network
Virtual drive Connects to the Virtual drive smart component.
This option is applicable only when you have Automation
Builder installed in the PC.
Comm settings Opens another dialog box where you can configure the
connections in more detail other than the above three
options.
To Next Page
Loading...
