24 Communication to SPRS
Observe the following actions in the Assistant control panel:
• Status LED start flickering, to indicate that data is transferring between the
drive and PC.
• Status LED keeps blinking, as long as the Drive composer PC tool is
connected to the drive.
• The welcome dialog box displays on the screen to indicate that the
application is initialized.
• On first time connection, parameter texts are loaded from the drive and this
might take few minutes depending on the drive type.
4. If the drive composer fails to connect online with the drive, go to View ® Settings
to check the COM settings and click View ® Refresh (Ctrl + R) to reconnect Drive
composer to the drive.
To Next Page
Loading...
