ABB CM30 - Page 32

ControlMaster CM30 and CM50
Universal process controllers,
1
/4 and
1
/2 DIN 7 Advanced Level
30 IM/CM/ED–EN Rev. B
…Display
Customise Pages The contents and appearance of each Operator Page (see page 16) can be
customized to meet particular user requirements.
Page Number Selects the Operator Page (1 to 4) to be customized.
Template Type Selects one of the standard operator page templates.
Templa te codes:
A = Analog value, T = Totalizer value, S = State value (see Parameters / Type below).
A (Style 1) A,A (Style 1) A,A,A (Style 1) A,A,A,A (Style 1) A,A,A,A,A A,A,A,A,A,A
A (Style 2) A,A (Style 2) A,A,A (Style 2) A,A,A,A (Style 2) A,A,A,A,S A,A,A,A,A,S
A,A (Style 3) A,A,A (Style 3)* A,A,A,A (Style 3) A,A,S,A,A,A
A,A (Style 4) A,A,A (Style 4) A,A,A,T** A,A,S,A,A,S
A,T (Style 1) A,A,S (Style 1) A,A,T,T
A,A,S (Style 2) Chart
A,A,T
A,T,T 
*CM50 only **CM30 only
Titlebar Tag A user-programmable, 16-character alphanumeric tag.
Parameters
Parameter Number 1 to 4 (depending on the Template Type selected).
Type Enables some parameter types to be modified to enable more flexibility in the available
display formats:
 Parameters set as Totalizer value by the Template Type can be changed to
analog or state parameters.
 Parameters set as State value by the Template Type can be changed to an
analog parameter.
Source Selects the signal to be displayed.
Color Selects the color to be used to display this parameter.
Color codes:
Black Red Yellow Green Cyan
Blue Magenta White Grey
Dark Cyan Dark Magenta Dark Grey Dark Yellow Dark Green
Dark Blue Dark Red
Theme RGB* Theme RYG**
*For use with State parameter types:
 State 0 tag is shown in red.
 State 1 tag is shown in green.
 State 2 tag is shown in blue.
Applicable only if Template Type = State.
**For use with State parameter types:
 State 0 tag is shown in red.
 State 1 tag is shown in yellow.
 State 2 tag is shown in green.
Applicable only if Template Type = State.