ABB CoreSense M10 - Toggling Golden Reference Spectrum Validation

D100 User Guide
Toggling validation of the golden reference spectrum
There are times when you will need to change the validation status of the golden spectrum reference.
To do so:
1 Click FGS misc from the Maintenance page. The FGS misc page appears (see Figure 70 below).
—
Figure 70 The FGS misc page
2 Toggle the Enabled box in the Golden spectrum reference validation section to change the validation
status.
3 Click Apply. From now on, the golden spectrum reference will be validated (or not, if you just so decided).