—
Chapter 2
Setting up the analyzer
Once you are in contact with the monitoring system, you can modify a few basic parameters, as
explained in the following pages.
You access your system via a web browser. The CoreSense M10 software supports the latest versions of
commonly used web browsers. Google Chrome and Microsoft Edge are strongly recommended.
Changing passwords
With the CoreSense M10 system, parameters and functions are made available depending on the
password used to access the system (rather than user names).
Upon connecting with the system for the first time, you were required to modify the original password, as
explained in the CoreSense M10 installation guide. Also, for cyber-security reasons, it is considered a best
practice to change passwords regularly. Not doing so could expose your entire network to cyberattacks.
If you did not change the passwords as required during installation, the default operator and
administrator passwords are still:
• Operator Ack
• Administrator Admin
To change passwords:
1 From the CoreSense M10 dashboard (see Figure 2 on page 3), click Settings. The Settings page
appears.
—
Figure 3 CoreSense M10 Settings page
2 Click Administration settings and enter the administrator password. The Administration settings
page appears.
To Next Page
Loading...
Need help?
General
