Setting up the analyzer 9
4 Set the time and date.
– Click the calendar icon to the right of the Analyzer date/time field and select the appropriate date
and time for your monitoring system.
—
Figure 7 Setting a date and time manually
OR
– Check the Use NTP Server box and enter a proper local Network Time Protocol server IP address
in the field underneath. This function allows for continuous and accurate timekeeping within the
monitoring system.
—
Figure 8 Setting up an NTP server for date/time management
5 At the bottom of the page click Apply to save the information that you just entered. A Restart
required dialog box appears.
To Next Page
Loading...
