ABB CoreSense M10 User Manual

iv User Guide
PIXIT for Setting Group Control Model .. C66
PIXIT for Reporting Model ......................... C66
PIXIT for Logging Model .............................C67
PIXIT for GOOSE Publish Model ................C67
PIXIT for GOOSE Subscribe Model .......... C68
PIXIT for GOOSE Performance ................. C69
PIXIT for Control Model .............................. C69
PIXIT for Time Synchronization Model .... C72
PIXIT for File Transfer Model ...................... C73
PIXIT for Service Tracking Model ..............C73
MICS ........................................................................C74
Logical Nodes List ........................................C74
SIML–Insulation medium supervision
(liquid) ..............................................................C74
PICS .........................................................................C78
ACSI Basic Conformance Statement .......C78
ACSI Models Conformance Statement ...C78
ACSI Service Conformance Test .............. C80
TICS Mandatory IntOp TISSUES .................... C83
D Advanced maintenance
Accessing the Maintenance page ................. D85
Gathering diagnostic data .............................. D86
Board data......................................................D86
FTIR data......................................................... D87
Hydrogen sensor data ................................ D88
Moisture sensor data .................................. D89
4–20 inputs .................................................... D89
Pump data ...................................................... D90
Source data ..................................................... D91
Temperature data ........................................ D92
Toggling relays.................................................... D93
Modifying 4–20 mA output values ............... D94
Working on pumps ............................................ D95
Activating a pump........................................ D95
Resetting the state of all pumps ............. D96
Enabling auto-refresh ................................. D96
Diagnosing system sources ............................D97
Changing the active source .......................D97
Resetting source odometers .................... D98
Reinitializing source initial data ...............D98
Managing Coresense M10 configurations ..D98
Backing up the current configuration ....D99
Restoring a configuration .........................D99
Toggling validation of the golden reference
spectrum ............................................................ D100
E Alternate fluids validation
Mineral Oil (IEEE Std C57.104-2019) ............ E101
Synthetic Ester (IEEE Std C57.155-2014) .... E101
Natural Ester (IEEE Std C57.155-2014) ........ E102
Silicon Fluid(IEEE Std C57.146-2005) .......... E102

ABB CoreSense M10 Specifications

General

Brand	ABB
Model	CoreSense M10
Category	Measuring Instruments
Language	English