34
Exchange thyristors sizes H1 … H4
3ADW000488R0101 DCS880 Service manual e a
− X30, X31 snubber resistor.
− X4, X5/X6, X15/X10 on the SDCS-BAB-F0x.
− XC12, XS13, X38 flat cables/cable from SDCS-CON-H01 to SDCS-PIN-H01.
− X99 auxiliary power supply.
13. At the SDCS-CON-H01 reconnect the flat cables (XC12, XS13), the cable connected at X38 and re-hinge
the control unit.
14. Reconnect the grounding/holding screws at the control unit.
15. Reconnect all I/O plugs at the control unit and all connetions at the present plug in options.
16. Reinstall the design cover and the control panel.
To Next Page
Loading...
