ABB DCS880 - Remove Faulty SDCS-BAB-F0 X

35
Exchange thyristors sizes H1 … H4
3ADW000488R0101 DCS880 Service manual e a
Remove faulty SDCS-BAB-F0x
− Follow the instructions Remove faulty thyristor modules until step 8 is done.
9. If existing remove the plastic cover.
10. Remove all connectors (SDCS-BAB-F01) or cables (SDCS-BAB-F02) from the faulty SDCS-BAB-F0x and
mark them clearly.
11. Remove the faulty SDCS-BAB-F0x and mark it clearly as defective.