82 Communication profiles
10 ABOVE_LIMIT 1 The actual frequency or speed
equals or exceeds supervision
limit (set by the drive parameter).
This is valid in both directions of
rotation.
0 The actual frequency or speed is
within the supervision limit.
11 EXT_CTRL_LOC 1 External Control Location EXT2
selected
Note concerning ACS880: This
bit is effective only if the fieldbus
interface is set as the target for
this signal by drive parameters.
User bit 0 selection (06.33).
0 External Control Location EXT1
selected
12 EXT_RUN_ENABLE 1 External Run Enable signal
received
Note concerning ACS880: This
bit is effective only if the fieldbus
interface is set as the target for
this signal by drive parameters.
User bit 1 selection (06.34).
0 No External Run Enable signal
received
13
…14
Reserved
15 FBA_ERROR 1 A communication error is
detected by the adapter module.
0 The fieldbus adapter
communication is OK.
Bit Name Value Description
To Next Page
Loading...
