2CDC172114M0201 7 www.abb.com/lowvoltage
2019-09-06 V1.3
Safety regulations
Attention!
Read the manual carefully and in full before using the device.
The enabling device may only be installed by specialist personnel, in compliance with regulations for AS-i
networks, the applicable regulations and standards, and the enclosed data sheet.
Failure to comply with the instructions, or a use that is not in accordance with the specified instructions, as
well as the improper installation or operation of the device, may adversely affect the safety of the user and
the facility.
A safety logic unit, configured in accordance with the specified use of the product, is required to monitor
(evaluate the signals) of the enabling device, allowing the product to be used the specified way.
All liability is excluded if the instructions are not complied with, especially in cases of interference with or
modifications to the product.
To Next Page
Loading...
