Specifications
WBPEEUI240766B0 1 - 9
Environment
Ambient temperature
Relative humidity
Altitude
Air quality
0° to 70° C (32° to 158° F)
5% to 95% up to 55° C (131° F) (noncondensing)
5% to 45% at 70° C (158° F) (noncondensing)
Pollution degree: 1
Sea level to 3 km (1.86 miles)
Noncorrosive
Shipping weight 1.146 kg (2.5 lb)
Container size 27.94 cm x 35.56 cm x 5.54 cm (11 in. x 14 in. x 3 in.)
CE mark declaration
EMC96 Directive 89/336/EEC
Low Voltage Directive 73/23/
EEC
This product, when installed in a Symphony cabinet, complies
with the following Directives/Standards for CE marking.
EN50082-2 Generic Immunity Standard - Part 2: Industrial
Environment
EN50081-2 Generic Emission Standard - Part 2: Industrial
Environment
EN61010-1 Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use - Part 1: General
Requirements
Certifications
CSA (pending)
Factory Mutual (FM)
(pending)
Certified for use as process control equipment in an ordinary
(nonhazardous) location.
Approved as nonincendive equipment for use in Class I; Division
2; Groups A, B, C, D; hazardous location.
NOTE:
1. Absolute maximum ratings indicate limits beyond which damage to the device may occur and device operation is not guaran-
teed.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Tabl e 1-4. Specif ication s (continued)
Property Characteristic/Value
To Next Page
Loading...
