1MRS 751108-MUM
3URWHFWLRQ5HOD\
Technical Reference Manual, General
5(;
9
5HTXLUHPHQWV
If the environmental conditions differ from those specified in section “Technical
data” on page 37, as to temperature and humidity, or if the environmental conditions
around the protection relay contains chemically active gases or dust, the relay should
be visually inspected in association with the secondary testing. The visual inspection
should focus on:
• Signs of mechanical damage to the relay case and terminals.
• Signs of corrosion on terminals or on the case.
• For information about the maintenance of relays, refer to section “Service” on
page 47.
Protection relays are measuring instruments and should be handled with
care and protected against moisture and mechanical stress, especially
during transport.
!
To Next Page
Loading...
