NoteAction
WARNING
Before continuing any service work, follow
the safety procedure in section The brake
release buttons may be jammed after service
work on page 199!
8
Refit the push button guard to the SMB cover.9
Press the push buttons 1 to 6, one at a time,
to make sure that the buttons are moving
freely and do not stay in any locked position.
10
DANGER
Make sure all safety requirements are met
when performing the first test run. See Test
run after installation, maintenance, or repair
on page 113.
11
Product manual - IRB 2600 249
3HAC035504-001 Revision: AD
© Copyright 2009-2023 ABB. All rights reserved.
4 Repair
4.3.5 Replacing the brake release board
Continued
To Next Page
Loading...
