IRB 2600ID
xx1000000822
Smallest circumscribed radius axis 5A
Hole through axis 6, diameter 50 mmB
See table below!C
C mmVariant
135IRB 2600ID-15/1.85
200IRB 2600ID-8/2.00
Fastener quality
When fitting tools on the tool flange, only use screws with quality 12.9. For other
equipment use suitable screws and tightening torque for your application.
Product manual - IRB 2600 85
3HAC035504-001 Revision: AD
© Copyright 2009-2023 ABB. All rights reserved.
2 Installation and commissioning
2.3.6 Fitting equipment on robot
Continued
To Next Page
Loading...
