NOTE
Do not mount several fiber optic sensor heads side by side; a mutual
interference may occur. Infrared dryer might also interference the
measurement. Please contact ABB Oy, KPM for more information.
Delivery limits
Manufacturer supplied components:
KPM KB2 sensor head tube (2 pipes) with position memory, 1 ea.
Mounting clamps, 2 ea.
Fiber optic cable (6 m/20", 9 m/30" or 12 m/40"), 1 ea.
Display unit, 1 ea.
Flexible conduit for a fiber optic cable protection (SS tubing, 25,4 mm / 1" OD), 1 ea.
Options:
Mounting rack.
Analog output board.
Display unit installation
Install the display unit to the wall outside the machine for easy access.
Fig. 2.1. Display unit dimensions (mm).
To Next Page
Loading...
