ABB M4M 20 - Page 37

M4M 20 NETWORK ANALYZER USER MANUAL
37
Modify password menu
In order to modify the password:
→ → Unit → Modify Password
1. Enter the current password. In order to select
each numerical character, it is necessary to
use .
2. Confirm the selection of all numerical
characters with
ENTER
.
3. When the modification is completed the
green popup bar Operation succeeded will
appear.
4. Set the new password.
5. When the entry is completed the green popup
bar Operation succeeded will appear.
If a Factory reset is carried out, also the password is reset to default.
1
2