EasyManua.ls Logo

ABB MB3000 Series - Environmental Operating Conditions

ABB MB3000 Series
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Environmental Section 8 Technical Information
36 AA003700-01 rev. G. 2.0
Environmental
In order for the MB3000 series FTIR spectrometer to meet its performance
specifications, it must be operated under the following conditions:
Storage temperature range:
0ºC to 30ºC, stable within ±5ºC
Operating temperature
range:
10ºC to 35ºC
Spectrometer specifications at 25ºC ± 5ºC
Humidity range:
5% to 80%, non-condensing
Pollution degree:
2 *
Altitude:
2000 m maximum
Pollution is any addition of foreign matter, solid, liquid, or gaseous (ionized
gases), that may produce a reduction of dielectric strength or surface resistivity.
Pollution degree 2 is normally only non-conductive pollution. However, a
temporary conductivity caused by condensation must be expected occasionally.

Table of Contents

Related product manuals