Section 9 Troubleshooting Before sending a spectrometer to ABB inc.
AA003700-01 rev. G. 2.0 43
Before sending a spectrometer to ABB inc.
Before sending a spectrometer to ABB, you must first:
– obtain from ABB’s after sales service a Contamination Data Sheet.
– fill out and sign the Contamination Data Sheet. Do not forget to check the
checkboxes of the Non-contaminated Material Declaration section. Then
return the fully completed Declaration to ABB.
– obtain the authorization from ABB personnel.You must receive a Return
Merchandise Authorization (RMA) prior to sending the analyzer back to
ABB, otherwise reception of analyzer will be refused.
To Next Page
Loading...
