Contact ABB service.
Refer to the back cover of
this document
.
Is power cable connected?
Is wall outlet adequate?
Is power switch ON?
Normal operation
of LED. Refer to LED
Identification on page 25.
How is the Network
LED?.
Is Power LED
Solid GREEN?
No
Yes
No
Yes
GREEN and AMBER
GREEN
Internal problems.
Contact ABB service.
Refer to the back cover of
this manual
.
Check if Network is active
Check if Network is connected
Try other Network cable
Try other Network outlet.
Wait for
How is the Status LED?
to finish initializing
.
Blinking
GREEN Solid
+ RED Blinks
Yes
OFF
GREEN
Normal
operation
RED
Blinking
No detector
GREEN
Solid
Solid or Blinking
Check software
Health monitoring.
OFF for more
Not connected
to software
Blinking
OR RED Solid
spectrometer
than 5 min.
Refer to Software
User’s guide.
or calibration.
(initialization is
performed if
system has been
perturbed.)
Red then
blinking Green
To Next Page
Loading...
