Firmware Update Appendix B Firmware Update
50 AA003700-01 rev. G. 2.0
STEP 2 The ABB Bomem FTIR utility will search the Network for the presence of
analyzers. A message indicating that the utility is detecting the presence of
analyzers will appear. Then a list of all the analyzers present on the Network
will appear in the ABB Bomem FTIR window.
STEP 3 In the ABB Bomem FTIR dialog box, select your instrument and click on
Update Firmware..
Figure B- 2. ABB Bomem FTIR dialog box
To Next Page
Loading...
