ABB PGC5000 Series - Master controller; Back of door; Master controller chassis

PGC5000
PGC5000 Series Service Instructions 8 Replacement parts
SI/PGC5000-EN, Rev B 77
8.2 Master controller
8.2.1 Back of door (see Figure 8.4)
Description Part Number
Front Panel PCB, version 1 852A004-1
Front Panel PCB, version 2 852A009-1
LCD Display, version 1 857Z002-1
LCD Display, version 2 857Z039-1
Touch Panel Controller 857Z030-2
Front Panel PCB
LCD Display
Touch Panel
Controller
Fig. 8.4. Back of Door
8.2.2 Master controller chassis (see Figure 8.5)
Description Part Number
Power Supply 857Z035-1
Single Board Computer PCB 852A001-1
Oven Controller PCB 852A002-1
Wago Control Module 866Z001-1
Wago End Module 866Z002-1
Wago 2 channel analog output, 4-20 mA 866Z003-1
Wago 4 channel analog output, 4-20 mA 866Z004-1
Wago 4 channel analog output, ±10V /0-10 V 866Z005-1
Wago 2 channel analog input, 0-10 V 866Z006-1
Wago 4 channel digital output, DC 24 V with low-side switching 866Z007-1
Wago 2 channel relay output, AC 30 V/DC 30 V 866Z008-1
Wago 4 channel digital inputDC 5 V 866Z009-1
Wago DC 24 V/DC 230 V supply 866Z010-1
Wago 4 channel digital input, DC 24 V 866Z012-1
Wago 4 channel digital output, DC 24 V with high side switching 866Z013-1
Wago 2 channel analog input, 4-20 mA 866Z014-1
Single Board Computer PCB
Wago Modules
Oven Controller PCB
Power Supply
Fig. 8.5. Master Controller