ABB PGC5000 Series - Optional DID replacement parts; EPC control assembly

PGC5000
PGC5000 Series Service Instructions 8 Replacement parts
SI/PGC5000-EN, Rev B 85
8.5.8 Optional DID replacement parts (see Figure 8.17)
Description Part Number
12V Power Supply 8230878-2210
Power Supply DID 835A001-1
Plasma Cell 885Z001-1
Top Nut O-ring 885Z002-1
SS Noise Shield 885Z003-1
Detector Exhaust Tube 885Z004-1
Fig. 8.17. DID Replacement Parts
8.6 EPC control assembly (see Figure 8.18)
The EPC Control Assembly is located inside the top panel of the oven.
Description Part Number
Proportional Valve 3617341-1
O-Ring Kit 801K001-1
Control PCB 802A011B-1
Sensor PCB Kit 801K007-2
Heater 81943A042-1
Metric Hex Key Wrenches TL161-1
EPC Service Tool Kit 801K005-1
Proportional
Valve
Sensor PCB
Heater
Control PCB
Fig. 8.18. EPC Control Assembly