36
ABB UPS PRODUCTS AND SOLUTIONS
Always have the following information available
when calling the after-sales service department:
1. Model number and serial number
2. Date on which the problem occurred
3. LCD/LED display infrmation and buzzer
alarm status
4. Mains power condition, load type and
capacity, environment temperature and
ventilation condition
5. Information on external battery pack
(battery capacity, quantity).
Press the ESC (Escape) button on the front
panel display for 3 seconds to silence the alarm.
Check the alarm condition and perform the
relevant action to resolve the condition.
If the alarm status changes or the ESC button is
pressed for 3 seconds again, the alarm beeps
again, overriding the previous alarm silencing.
—
6.3 Silencing the alarm
To Next Page
Loading...
Need help?
General