ABB PowerValue 11 T G2 Series - Appendix B

40
ABB UPS PRODUCTS AND SOLUTIONS
—
Appendix B
Winpower SNMP/Modbus card available
parameters (webserver interface)
The parameters available from WinPower
SNMP/Modbus cards are shown below.
Parameter Type View
UPS Status General, status UPS Monitoring >> UPS Status
UPS Temperature General, measurement UPS Monitoring >> UPS Status
Voltage Input, measurement UPS Monitoring >> UPS Status
Frequency Input, measurement UPS Monitoring >> UPS Status
 Output, measurement UPS Monitoring >> UPS Status
Voltage Output, measurement UPS Monitoring >> UPS Status
Frequency Output, measurement UPS Monitoring >> UPS Status
Battery Status Battery, status UPS Monitoring >> UPS Status
 Battery, measurement UPS Monitoring >> UPS Status
Voltage Battery, measurement UPS Monitoring >> UPS Status
Time on Battery Battery, measurement UPS Monitoring >> UPS Status
Output Rating Voltage Output, Rating UPS Monitoring >> UPS Parameters
Output Frequency Rating Output, Rating UPS Monitoring >> UPS Parameters
Output Rating VA Output, Rating UPS Monitoring >> UPS Parameters
UPS Model Additional UPS Information UPS Monitoring >> UPS Identification
UPS Description Additional UPS Information UPS Monitoring >> UPS Identification
Firmware Version Additional Network card Information UPS Monitoring >> UPS Identification
MAC Address Additional Network card Information UPS Monitoring >> UPS Identification