ABB ProcessMaster FEP630 - Menu Levels Overview

58 FEP630, FEH630 ELECTROMAGNETIC FLOWMETER | CI/FEP630/FEH630-EN REV. D
… 7 Operation
Menu levels
Process display
Information level
(Operator Menu)
Configuration level
(Configuration)
...Operator Page 1 to n Easy Setup
Autoscroll Device Info
Diagnostics Device Setup
Signals View Display
Input/Output
Process Alarm
Diagnostics
Totalizer
Sensor Setup
Process display
The process display shows the current process values.
There are two menu levels under the process display.
Information level (Operator Menu)
The information level contains the parameters and information that are relevant for the operator.
The device configuration cannot be changed on this level.
Configuration level (Configuration)
The configuration level contains all the parameters required for device commissioning and
configuration. The device configuration can be changed on this level.
For additional information on the parameters see Parameter description in the operating instruction ,
Change from one to two colu mns