103Operation
EN
The parameters related to the customer wireless network (setted on the router) that must be known and
to be entered during this step are:
• IP Settings (DHCP or Static):
If you select the DHCP function (default setup) the router will
automatically assign a dynamic IP address to the inverter
whenever it tries to connect to the user network.
With Static, the user can assign a fixed IP address to the system.
The data which has to be entered in order for IP static address
assigning to take place will appear. Complete the additional
fields at the bottom of the screen (all the fields are mandatory
with the exception of the secondary DNS server).
• Available networks (SSID):
Identify and select your own (customer) wireless network from
all those shown in the SSID field (you can carry out a new search
of the networks that can be detected with the Update button
).
Once the network has been selected, confirm.
• Password (Wireless network password):
Enter the password for the destination network (if necessary)
and start the connection attempt (it will take a few seconds).
• Click on “Connect” button.
•
A message will ask for confirmation. Click “Next” to connect the
inverter to the wireless network.
To Next Page
Loading...
Need help?
General