122 Product manual - PVS-175-TL;A.1 Version
EN
CONNECTIVITY CHECK
In the Connectivity Check sub-menu it’s possible to carry out connectivity tests of the wireless network
connection, ethernet connection, connection to Aurora Vision and firmware upgrade servers.
At the end of the test it will be reported the detail of the results.
COUNTRY STANDARD
By accessing to the Country Standard sub-menu you can
modify the grid standard within 24 hours while the inverter is
operating.
NOTE – D After the grid standard is set you have 24 hours to make any changes to the grid
standard value; 24 hours later the Country Standard sub-menu will be locked, and any
subsequent changes might only be made accessing with Admin Plus privileges. Refer to the
dedicated section on “USER menu” and “SERVICE TOOLS menu” to know how to unlock the
Country Standard sub-menu.
To Next Page
Loading...
Need help?
General