GUID-15ADD86B-0C1F-43A4-92C5-E1642B1BF1E5 V1 EN
Figure 123: Updating the communication configuration in the IED with the
configuration made in PCM600
1. Select which configuration part to include in writing.
• Select GOOSE to update the GOOSE configuration part in the IED.
• Select Process bus (IEC 61850-9-2) to update the IEC 61850-9-2
configuration part in the IED.
The options can be left unselected. In this case, other parts of the configuration
are updated.
2. Select whether or not to update the configuration.
• Click Continue to update the selected communication configuration parts
in the IED.
• Click Cancel to cancel the writing operation.
Section 7 1MRS759117 A
IEC 61850 communication engineering
144 REX640
Engineering Manual
To Next Page
Loading...
