GUID-5ACE4A4F-A042-46BB-9FDA-3C3C29A2BFB5 V1 EN
Figure 79: Adding a signal
• Remove existing signals.
1. In Signal Grouping Editor dialog, select a group from the Signal Group
drop-down list.
2. Select the required signals and click .
3. Click OK.
6.1.3 Page Organizer
Page Organizer is used for configuring the main screen of LHMI by creating main
pages and linked pages. Pages can be added, removed or reordered in Page Organizer
and, for example, their visibility can be set to "Basic" or "Advanced". These access
rights are mapped to user roles with User Management in PCM600 and the pages are
filtered based on the mapping.
ABB built-in pages are marked with a padlock symbol. They are
locked and cannot be modified.
Section 6 1MRS759117 A
LHMI engineering
102 REX640
Engineering Manual
To Next Page
Loading...
