TVTR and TCTR function blocks accept analog channels connected
only either from local or remote, that is, local and remote channels
cannot be mixed within a TVTR/TCTR function block.
It is not possible to forward the received remote analog channels.
An analog input can only be connected to one function block. Triplets
(for example, U3P and I3P) should be used instead in the application
to connect analog inputs to other function blocks.
Example 4:
LED10
O:2|T: 2,5|I:10
OK
ALARM
RESET
Slot B (BIO).X1-1;4_BI1
Input 1 ALARM
GUID-DB87B9BD-87FE-4165-83B8-0C58D2218207 V1 EN
Figure 54: Hardware binary input channel shared by function blocks
GOOSERCV_BIN
O:15|T:2,5|I:0
IN OUT
VALID
OR
O:19|T:2,5|I:0
B1
B2
O
LED14
O:17|T:2,5|I:14
OK
ALARM
RESET
INTERLOCK
GUID-D7EB02F6-F3BE-482A-9C8A-D1E51ECA550E V1 EN
Figure 55: GOOSE input shared by function blocks
1MRS759117 A Section 5
Protection and control engineering
REX640 75
Engineering Manual
To Next Page
Loading...
