Technical data
110
Connectors:
• 34-pin parallel bus connector
• RJ-45 connector
Current consumption:
• 380 mA average (5 V), supplied by the control board of the drive
General:
• Estimated min. lifetime: 100 000 h
• All materials UL/CSA-approved
• Complies with EMC standards EN 50081-2 and EN 50082-2
Ethernet link
Compatible devices: Ethernet standard IEEE 802.3 and 802.3u
devices
Medium: 10base-TX or 100base-TX
• Termination: Internal
• Wiring: CAT 5 UTP, CAT 5 FTP* or CAT 5 STP*
(*Recommended)
• Connector: RJ-45
• Maximum segment length: 100 m
Topology: Bus, star
Serial communication type: Half and full Duplex
Transfer rate: 10/100 Mbps
Carrier protocol: TCP/IP
Application protocols:
• Modbus/TCP
• PROFINET IO
To Next Page
Loading...
