Communication
99
Table 22. Channel Error types
*See drive manuals for detailed list of supported DRIVECOM faults and
corresponding internal fault codes. Drives also have manufacturer specific
DRIVECOM faults that are not visible via fieldbus.
ChannelError
Type
Abbreviation Description
Corresponding
DRIVECOM fault
numbers*
0x9000 MICRO_HW Microcontroller
hardware or software
6000, 6010, 6100, 6306-
630F, 6320
0x9001 MAINS Mains supply 3210, 3211
0x9002 LOW_VOLT Low voltage supply 3130, 3220
0x9003 DC_OVERV DC link overvoltage -
0x9004 POWER_ELEC Power electronics 2211, 2212, 2300, 2310,
2312, 2340, 3381, 5410,
5441, 5442, 5481, 5482,
7110-7114
0x9005 OVERTEMP Overtemperature
electronic device
4110, 4210, 4280, 4310
0x9006 EARTH Earth/ground fault 2330
0x9007 MOTOR_OVR Motor overload 7121, 7122
0x9008 FB Fieldbus system -
0x9009 SAFETY Safety channel -
0x900A FEEDBACK feedback 5210
0x900B INTCOMM Internal communication 7500, 7510, 7520
0x900C INFEED Infeed -
0x900D BRAKE_RES Brake resistor -
0x900E LINE_FILTER Line filter -
0x900F EXT External 9000
0x9010 TECH Technology -
0x9011 ENGINEER Engineering -
0x9012 OTHER Other 3220, 5300, 7000, 7301-
7303, 7310, 8110, 8500,
8612
To Next Page
Loading...
