Test & Simulation RTU500 series Remote Terminal Unit
SEV and SSC view - Elements of the user interface
4-16 | 1KGT 150 924 V000 1 - ABB AG
4.5.3 STOP button
See Chapter 4.4.3.
4.5.4 Control panel for process connection
This control panel is the same explained in Chapter 4.4.4.
From the point of view of process disconnection, SEV are treated in the same way that process
information inputs (SPI, DPI, STI, AMI, DMI, MFI, BSI and ITI). That is, they are disconnected in
monitoring direction.
On the other hand, SSC are treated in the same manner as process command outputs (SCO, DCO,
RCO, ASO, DSO, FSO and BSO). They are disconnected in controlling direction. Note that automatic
simulation of pre-defined command responses and command reactions are not allowed here.
4.5.5 Status indicator
See Chapter 4.4.5.
4.5.6 Log file download link
See Chapter 4.4.6.
4.6 Security Events view - elements of the user interface
4.6.1 Signals grid
The signal grid, like in the other two views, is central element of the user interface in the Security
events view. For this reason, please read Chapter 4.4.1 carefully.
In this view's grid, the three first column help the user to filter the appropriate signals, while the two
last ones trigger the simulation. As the security events have no value or cause of transmission, this
grid has not such columns.
4.6.2 Input for multiple simulation interval
See chapter Chapter 4.4.2.
4.6.3 STOP button
See chapter Chapter 4.4.3.
To Next Page
Loading...
