ABB | SACE Emax 2
Mechanical accessories
4 - Lifting plates
191 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
4 - Lifting plates
Lifting plates are applied to the circuit-breaker so that it can be handled when unpacked and for the
racking-in/racking-out operations.
NOTE:
Lifting plates are only required for E2.2, E4.2 and E6.2.
Figure 123
Information on the assembly is available on the website http://www.abb.com/abblibrary/
DownloadCenter/, in particular with the kit sheet 1SDH001400r0912.
To Next Page
Loading...
