ABB SACE Emax E4.2 - Ekip Touch Models and Versions

ABB | SACE Emax 2
Trip unit Overview
2 - Ekip Touch models and versions
18 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
2 - Ekip Touch models and versions
Default functions and
extensions
Every Ekip Touch module has default measurement and protection functions, which can be extended with
the aid of additional software packages.
The extensions (additional SW packages) can be pre-engineered when the circuit-breaker is ordered or at
a later date (in this case, via ABB Ability Marketplace
TM
Overview
Figure 4
Model Ekip Touch
Ekip Hi-
Touch
Ekip G
Touch
Ekip G Hi-
Touch
Page
Versions LSI, LSIG LSI, LSIG LSIG LSIG
Standard protections X X X X 55
Voltage protections O
(1)
X X
(3)
X 65
Voltage advanced
protections
O
(1)
O X
(3)
X 68
Frequency protections O
(1)
X X
(3)
X 72
Power protections O
(1)
X
(3)
X
(3)
X 75
ROCOF protections O
(1)
O O X 81
Adaptive protections O X O X 82
Standard Measurements X X X X 113
Measuring Measurements O X X X 117
Class 1 Power & Energy
Metering
O
(2)
X O X 120
Datalogger O
(1)
X X X 121
Network Analyzer O
(1)
X O X 123
X = Available by default; O = Optional
(1)
Configurable if Measuring Measurements package is present
(2)
Only available at the time circuit-breaker is ordered
(3)
Certain protections of the complete package are available by default; the remaining ones can be
activated on request