SM500F
Field mountable paperless recorder Appendix F – Batch Recording
IM/SM500F Rev. Z 175
Note. These fields are editable only if defined during configuration – see
page 180.
Select the relevant edit button to modify each field. A list box is displayed
to enable to operator to either select a previously defined entry (max. 10)
or to define a new entry (max. 18 characters per field.
The operator's name is displayed if 'Operator login' is not set to 'Disabled'
– see page 179.
Select 'OK' to accept changes and start batch recording. Select 'Cancel'
to return to the chart view without starting batch recording.
To Next Page
Loading...
