ABB SM500F - Page 73

SM500F
Field mountable paperless recorder 7 Configuration
IM/SM500F Rev. Z 71
Referring to Fig. 7.6, use data entry dialog boxes as follows:
a Use the and keys to highlight an item and press to select it.
b Parameter limits.
c Use the and keys to highlight the text field and use the and keys to position the
cursor to edit text as required.
d Cursor.
e Use the , , and keys and press to highlight a character and press to select it.
f Spacebar.
Note.
1. Items not selected are indicated by an X in the parameter value window.
2. Values outside the preset parameter limits or with too many decimal places are highlighted when
the OK button is selected.
Note. Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear
truncated in some Operator views. In such cases, use lower case letters or fewer characters.
Fig. 7.6 Data Entry Dialog Boxes
1 2 X 4
59.45
2
4
3
1
5
6
Refer to Note 1 below
Refer to Note 2 below