60 CI/FSV/FSS/430/450-EN Rev. G | VortexMaster FSV430, FSV450 SwirlMaster FSS430, FSS450
Once you have logged on to the corresponding access level,
you can edit or reset the password. Reset (status "no
password defined") by
selecting " " as a password.
Enter Password
**********
QRSTUVWXYZ
Next OK
4. Enter the corresponding password (see chapter
""Parameterization via the "Easy Setup" menu function" on
page 41"). No password is preset in the factory settings.
Users can switch to the configuration level without
entering a password.
The selected access level remains active for 3 minutes.
Within this time period you can toggle between the
process display and the configuration level without re-
entering the password.
5. Use to confirm the password.
The LCD display now indicates the first menu item on the
configuration level.
6. Select a menu using / .
7. Confirm the selection with .
7.2.5 Error messages on the LCD display
In the event of an error, a message consisting of a symbol and
text (e.g. Electronics) appears at the bottom of the process
screen.
The text displayed provides information about the area in
which the error has occurred.
Process display
Electronics
The error messages are divided into four groups in
accordance with the NAMUR classification scheme. The group
assignment can only be changed using a DTM or EDD:
Symbol Description
Error / failure
Function check
Outside of the specification
Maintenance required
The error messages are also divided into the following areas:
Range
Description
Fonctionnement Error / alarm due to the current operating
conditions.
Sensor Error / alarm of the flowmeter sensor.
Electronics Error / alarm of the electronics.
Configuration Error / alarm due to device configuration.
NOTICE
For a detailed description of errors and information regarding
troubleshooting, refer to the chapter titled "Diagnosis / Error
messages" in the operating instruction.
To Next Page
Loading...
Need help?
General
