Table 8. Guidance and Manufacturer’s Declaraon – Electromagnec Immunity
Immunity Test IEC 60601 Test Level Compliance Level Electromagnec Environment
Guidance
Radiated RF IEC 61000-4-3 10 V/m
80 MHz to 2.7 GHz
80% AM at 1 kHz
10 V/m
communicaons equipment
(transmiers) and the device as
recommended below, according
to the maximum output power of
the communicaons equipment.
Recommended minimum
separaon distance for higher
immunity test levels
where P is the maximum power
in was (W), d is the
recommended separaon
distance in meters (m), and E is
the immunity test level in volts
per meter (V/m).
NOTE:
▪
U
T
is the AC mains voltage prior to applicaon of the test level.
▪
▪
These guidelines may not apply in all situaons. Electromagnec propagaon is aected by absorpon
▪
and reecon from structures, objects, and people.
43