33
ENGLISH
To close, slide the battery door in until it
snaps into place.
3
Caring for Your Meter
Avoid getting dirt, dust, blood, control solution, water or any other
liquid in the meter’s test strip and data ports. Clean the outside of
the meter using a cloth dampened with one of the following:
• Mild detergent/mild soap and water.
• 70% isopropyl alcohol.
• A mix of one part household bleach, nine parts water.
Important:
Never the immerse the meter in water or any other liquid.
Install the battery with the positive
(+) sign facing up towards you.
2
To Next Page
Loading...
