Step
Action
2
Touch the setting you want to change:
Alarms – See Reader Alarms section for information on setting
alarms
Sound & Vibration – Set Reader sound and vibration. These
also apply to alarms
Time & Date – Change the Time or Date
Reminders – See Using Reminders section for information on
setting reminders
Control Solution Test – Perform a control solution test
Language – Change the language on the Reader
System Status – Check Reader information and performance
• View System Information: The Reader will display
information about your System including:
◦ Current Sensor end date and time
◦ Reader serial number and version number
◦ Serial numbers and status codes of most recent Sensors
(up to three)
◦ Sensor version for most recent Sensor
◦ Number of Sensors that have been used with Reader
◦ Number of tests that have been performed using test
strips
146
To Next Page
Loading...
