Checking Your Glucose
Checking Your Glucose with the Reader
Step Action
1
Turn the Reader on by pressing
the Home Button or touch
Check Glucose from the Home
screen.
2
Hold the Reader within 1.5 inches (4 cm) of your
Sensor to scan it. Your Sensor wirelessly sends
glucose readings to the Reader. If sounds are
turned on, the Reader beeps when the Sensor
has been successfully scanned.
Note: If the Sensor is not successfully scanned within 15
seconds, the Reader displays a prompt to scan the Sensor
again. Touch OK to return to the Home screen and touch
Check Glucose to scan your Sensor.
Check
Glucose
Review
History
10:23pm
Ends in 14 days
OR
44
To Next Page
Loading...
