Starting Your Sensor with the App
Before you start your Sensor, choose which device you want to use. If you
start the Sensor with the App, you will be unable to use the Reader to
check your glucose or receive alarms.
IMPORTANT:
• The App requires that your phone has date and time enabled
to set automatically. You can check this in your settings. Manual
changes to your phone’s time and date setting can lead to
incorrect time stamp or inability to use the App.
• When using the App, you should keep your iPhone well charged
and be sure you have access to a blood glucose monitoring
system.
• When you scan your Sensor, you will receive a tone and vibration.
If your iPhone's volume is turned o, you will not hear the tone.
• The NFC (Near Field Communication) antenna is on the top
edge of iPhone. Hold this area near your Sensor when you are
scanning. You may need to adjust your scan distance based
on what clothing you are wearing. In addition to proximity
and orientation, other factors can aect NFC performance. For
example, a bulky or metallic case can interfere with the NFC
signal. Keep in mind that the ease of scanning a Sensor may vary
between devices.
41
To Next Page
Loading...
