Step Action
1
Tap the scan button .
Note:
• You can either tap the blue box on the Home screen or
at the top right.
• If the Ready to Scan dialog disappears, tap the scan
button
again.
NFC is now activated and your iPhone is ready to scan the
Sensor.
2
Hold the top of your iPhone near the Sensor (this can be
done over clothing). Do not move your iPhone until you
hear a tone and/or feel a vibration. This completes the scan.
Note:
• If you need help, tap HOW TO SCAN A SENSOR to view an
in-app tutorial. You can also access this later by going to
the Main Menu and then tapping Help.
• If your Sensor is not successfully scanned, you may receive
this Scan Error: “Your scan was unsuccessful. Tap the scan
button and scan again.”
See Troubleshooting section for additional error messages.
42
To Next Page
Loading...
