What you See What it Means
Scan Sensor now?
Signal Loss Alarm
YesNo
The Signal Loss Alarm noties you if your Sensor
has not communicated with the Reader for 20
minutes and you are not receiving Low or High
Glucose Alarms. Signal loss could be caused by
the Sensor being too far away from the Reader
(over 20 feet) or another issue such as an error or
problem with your Sensor or Reader.
Touch No to dismiss the alarm.
Touch Ye s or press the Home Button to dismiss
the alarm and scan the Sensor.
Note:
• If you ignore an alarm, you will receive it again in 5 minutes if the
condition still exists.
• If you receive an alarm while the Reader is connected to a
computer, you must rst unplug the Reader to scan the Sensor.
87
To Next Page
Loading...
